Sound - Mitsubishi Electric WD-73740 Supplemental Owner's Manual

S ound

Sound

Au dio
Settings in this menu are saved for the current input only with the exception of Balance,
which applies to all inputs. Press
menu screen.
To make Audio adjustments while watching TV and without using the menu:
1. Press the AUDIO key.
2. Press to select an audio option.
3. Press to change the setting.
TV Speakers
Center [Center channel
level adjustment]
Bass Controls volume of low-pitched sound from the TV speakers.
Sub woofer [Subwoofer level
adjustment]
Treble Controls volume of high-pitched sound from the TV speakers.
Balance Controls audio balance between the right and left TV speakers
Sou nd Mode
Surround Modifies audio from the TV speakers.
Level Sound On, Off Reduces differences in sound volume between programming segments, such as the
Li sten To
(applies only
to analog
channels from
the ANT input)
(Second Audio
Program)
On Turns on the internal TV speakers.
Off Turns off the internal TV speakers so you hear sound only from a connected A/V receiver.
Note: When you disconnect an A/V receiver, be sure to change the Sound setting
to TV to hear sound from the TV speakers.
Ce nter 840 Series. Makes the TV's speaker array act as a center channel. See "Using the
TV Speakers as a Center Channel," page 16 .
Notes:
• When Center is active, the subwoofer output is muted even if set to On.
• To de-activate the center channel, change TV Speakers to On or Off.
840 Series. Adjusts the volume level of the TV speaker array when used as a
center channel.
Note: Set TV Speakers to Center to make this adjustment available.
840 Series. Adjusts the volume level of a connected subwoofer.
Note: Set Sound > Global > Subwoofer to On to make this adjustment available.
Stereo No special audio effects from the TV speakers
• For monaural (non-stereo) programs, creates a simulated stereo effect.
• For stereo programs, creates a simulated surround sound effect.
• The TV's speaker array plays surround sound if available.
Music 840 Series. Optimizes the TV's speaker array for music listening.
Night 840 Series. Focuses the TV's speaker array to a single point to limit sound heard by
others outside the room. Press ENTER to adjust the focal point (Night Angle).
difference between regular broadcast programs and commercial segments.
Stereo The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The word
Stereo is displayed when you tune to a channel broadcasting in stereo.
Mono Reduces background noise. Use when receiving a weak stereo audio signal. All
audio is played as mono.
SAP Selects an additional monaural sound track not audible during normal TV viewing.
The SAP signal might be related to the program (such as a sound track in a foreign
language), or it might be unrelated (such as a weather report). If an SAP signal is
broadcast, the letters SAP are displayed when you tune to the channel.
2. TV Menus
to make changes and then press MENU to return to the
For assistance call 1(800) 332-2119
21