Cleaning - Profi Care PC-HSM/R 3051 Instruction Manual

Outlining and Shaving the Neck
The shaving head allows precise outlining the shape of the beard, even in difficult to
reach places as well as a clean shaving of the hairline at the neck.
1. Turn the appliance off with the switch (1).
2. Remove the cutting length comb (7) and turn the hair clipper on again.
End of Operation
Switch off the appliance. OFF can be seen on the switch (1).
WARNING:
• Switch off the appliance before cleaning.
Unplug the power supply unit from the
socket.
• Do not immerse the appliance, the charg-
ing station or the power supply unit in
water!
CAUTION:
• Also do not clean the appliance under running water! The electronics could be
damaged.
• Do not use a wire brush or other abrasive objects.
• Do not use any sharp or abrasive cleaning agents.
• Regular cleaning and maintenance ensures optimum results and long lifetime.
• Use the cleaning brush to remove remaining hair after use. Remove the attach-
ment comb (7).
• Clean the casing with a slightly damp cloth, if necessary.
• Always clean the power supply unit with a dry cloth.
PC-HSMR3051_IM_new2

Cleaning

17
27.12.22