Page 1
Model#: SP7146 USER MANUAL Please carefully check the unit and make sure there is no damage when you open the carton. QUESTIONS, PROBLEMS, OR MISSING PARTS? Please Contact Customer Service Before Returning to Store www.soupro.com servicespi@sourceproinc.com +1-844-455-4621 If parts are damaged or missing please call customer service for replacements.
SAFETY INSTRUCTIONS Please read and understand this entire manual before attempting to assemble, operate or install the product. IMPORTANT NOTICE and injury to persons, including the following: WARNING: Place this unit in a location that avoids direct sunlight and high temperatures. WARNING: Plastic bags, nails, etc.
WARRANTY 1-YEAR LIMITED WARRANTY Source Pro Industries Ltd. (hereinafter referred to collectively as “the Company”) warrants that your new HearthPo Electric Fireplace is free from manufacturing and materials defects for a period of one (1) year from date of purchase. Subject to the following conditions and limitations: The electric fireplace must be installed and operated at all times in accordance with the installation and operating instructions furnished with the product.
PREPARATION IMPORTANT INFORMATION Before you begin, locate the instructions and hardware. Be sure you have all of the parts and can identify them. cardboard. Assembly of this product may require more than one person. WARNING Do not let any sharp objects touch or rub the surface of the product. When assembling, do not let children play around the working area.
ASSEMBLY Do not fully tighten screws during assembly. Only tighten when all parts are installed in place.
Page 8
ASSEMBLY Do not fully tighten screws during assembly. Only tighten when all parts are installed in place.
Page 9
ASSEMBLY Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. SS-2 SS-1 SS-1 SS-1 SS-1 SS-1 SS-1 SS-2 SS-2 SS-1 SS-2 SS-2 SS-2 SS-2 CC CC...
Page 10
ASSEMBLY Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. STEP: 7a STEP: 7b...
Page 11
ASSEMBLY Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. FIREPLACE...
Page 12
ASSEMBLY Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. WARNING: Death or serious injury may occur when children climb on audio and/or video equipment furniture. A WARNING remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result Serious or fatal crushing injuries can the furnishing may tip over on to the child.
SAFETY INFORMATION Firebox Model SP1816SC-HE ATTENTION: warranty. WARNING: • If the information in this manual is not followed exactly, an electric shock or fire may result causing property damage, personal injury or loss of life. CAUTION: • (0.9m) from the front of the heater and away from the side and rear. IMPORTANT INSTRUCTIONS and injury to persons, including the following: Read all instructions before installing or using this heater.
SAFETY INFORMATION ELECTRICAL CONNECTION: ELECTRICAL SPECIFICATIONS • A 15-amp, 120-volt, 60 Hz circuit with a properly grounded Voltage: 120 VAC, 60 Hz outlet is required. Preferably, the fireplace will be on Amps: 12.5 Amps a dedicated circuit as other appliances on the same Watts: 1500 Watts circuit may cause the circuit breaker to trip or the fuse...
CARE AND MAINTENANCE CLEANING INFORMATION: • Make sure the unit is turned off, unplugged and the heating elements of heater are cool whenever you are cleaning the heater. • Clean the metal trim using a water-dampened, soft, and clean cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim.
Page 16
QUESTIONS, PROBLEMS, OR MISSING PARTS? Please Contact Customer Service Before Returning to Store www.soupro.com servicespi@sourceproinc.com +1-844-455-4621 Crafted in China Ver. 2 Distributed by Source Pro Industries Ltd. Workshop 15 & 18, 10/F Metro Centre No. 32 Lam Hing Street, Kowloon Bay, Hong Kong...
Need help?
Do you have a question about the SP7146 and is the answer not in the manual?
Questions and answers