Kenwood C-V150 Service Manual page 4

C-V100/V150/V300/V350
For C-V100
TIMER
TIMER
indicators
3 4
1 2
ON/STANDBY
POWER
PHONES
ON/STANDBY
5 6
The keys which have the same names as the controls on the
remote control unit provide the same functions as them.
1 POWER
(ON/STANDBY) key
(U.S.A. and Canada)
Press to switch between ON and STAND-
BY.
2
(ON/STANDBY) key
Press to switch between ON and STAND-
BY.
3 STANDBY indicator
4 Remote sensor
5 PHONES jack
For use in headphones listening.
6 INPUT SELECTOR key
Press to select the input.
7 TAPE 2 (MONITOR) key
For use in monitoring of recording, etc.
STANDBY mode indication
While standby mode is indicated, a small amount of power is supplied to the system to back up the memory. In this mode, the system can be
turned ON by remote control.
4
Frequency display, input
selector display, preset
channel display, surround
mode display
Memory indicator
MEMO
FM
AM
1 2
Broadcast band
indicators
TIMER
INPUT TAPE 2 CLOCK MODE
(MONITOR)
7 8 9
8 CLOCK key
Press to set the clock.
9 TIMER MODE key
Press to switch the timer modes.
0 TIMER SET key
Press to set the timer function.
! AUTO key
Press to select the tuning mode.
The auto tuning or manual tuning mode
can be selected.
The input selection display of a source can
be switched to another by pressing and
holding the AUTO key for more than 2
seconds.
@ A.MEMO key
Press when using the auto memory func-
tion.
CONTROLS
Decibel indicator
Receiving
frequency unit
indicators
Display
TIMER
SET AUTO A.MEMO BAND
0 ! @ #
AUTO tuning mode/AUTO
PRO LOGIC
stereo reception indicator
indicator
Delay time indicator
TAPE 2 indicator
dB
PRO LOGIC TAPE 2
ms
3 STEREO SOURCE
DIRECT
kHz
DSP
MHz
SLEEP
SLEEP
DSP indicator
TIMER
indicator
3 STEREO
SOURCE DIRECT indicator
indicator
*
VOLUME CONTROL
TUNING MODE MULTI. CONTROL
LEVEL DOWN
$ % ^
# BAND key
Press to switch the broadcasting band.
$ TUNING keys (∧, ∨)
Press to select the radio station to be re-
ceived.
These keys are also used in the clock ad-
justment and timer operations.
% MODE key
Press to switch various setting modes.
^ MULTI. CONTROL key
Press to select various setting modes.
& VOLUME CONTROL knob
* GRC transmitter
Outputs the signals transmitted to the
Graphical Remote Control.
STEREO indicator
AUTO
STEREO
TUNED
MUTE
TUNED indicator
MUTE indicator
UP
&