NETGEAR WAX618 User Manual page 121

Insight Managed WiFi 6 AX3000 Access Point Model WAX618
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 24.
The Dashboard page displays.
4. Select Management > Configuration > Security > MAC ACL.
5. Click the group name for the MAC ACL that you want to set up.
The previous figure shows some examples. Devices in the Available Stations table
are automatically detected by the access point and are common to all MAC ACLs,
which allows you to add a device to more than one MAC ACL. A neighboring station
displays as Neighbor and a connected station displays as connected.
6. To change the group name, enter a new name in the Group Name field.
The default group names for the eight MAC ACLs are Management, Guest, Guest1,
Custom, Custom 1, Custom 2, Custom 3, and Custom 4.
7. Select the ACL Policy Allow or Deny radio button.
If you select the Allow radio button, a WiFi device for which you import the MAC
address into the ACL is allowed access to the WiFi network, but all other WiFi devices
are denied access to the WiFi network.
Manage Access and Security 121 User Manual