Subscribe to Our Youtube Channel
Related Manuals for Truper Expert MADE-30NX
Summary of Contents for Truper Expert MADE-30NX
- Page 1 Instructivo de 30 kg 2 000 W Demolition Hammer Applies for: Code Model 100894 MADE-30NX MADE-30NX Read this manual thoroughly CAUTION before using the tool.
-
Page 2: Table Of Contents
Anti-slip mounting Parts Keep this manual for future references. Accessory mounting The illustrations in this manual are for reference only. They might be different from the real tool. Adjustments Operation Start up Maintenance Authorized service centers Warranty policy MADE-30NX ENGLISH... -
Page 3: Technical Data
Technical Data MADE-30NX Code 100894 Description 30 kg Demolition hammer Voltage 127 V~ Frequency 60 Hz Current 15 A Power Impact energy 2 000 W 62 Joules Weight 30 kg Tool holder HEX 1 ” Work cycle 50 min work per 20 min rest. Maximum 6 hours per day Conductors 16 AWG x 2C with insulation temperature of 221 °F... -
Page 4: General Power Tool Safety Warnings
General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references. -
Page 5: Safety Warnings For The Use Of Demolition Hammers
Safety warnings for the use of Demolition Hammers Choose the appropriate drill or attachment While operating the demolition hammer CAUTION • The tool is designed to work with bits CAUTION • Hold the tool by its handle and by or accessories with 1 1/8" HEX shanks. Choose the the auxiliary handle. -
Page 6: Anti-Slip Mounting
Anti-slip mounting Once the accessories are confirmed and the Verify that the following parts are included: vibration control spring assembled, proceed to fix • Anti-slip handle. the anti-slip handle to the demolition hammer. • 4 Hex head screws • 1 Hex wrench Match the 4 holes on the periphery of the CAUTION Before starting with the assembly... -
Page 7: Accessory Mounting
Accessory mounting CAUTION To prevent accidents, confirm that the switch is off and disconnect the plug from the power supply. WARNING Wear gloves whenever you change accessories. They can become extremely hot during the operation. • Clean the accessories shanks and apply grease from the included tubes before mounting them on the tool fastener (A). -
Page 8: Operation
Start up ON AND OFF • Press and hold the switch to start the hammer demolition. • To stop the use, release the switch. Operation Maintenance Cleaning and care Lubrication • Clean the machine with a soft cloth, moistened with soap •... -
Page 9: Authorized Service Centers
Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-8737 to get information about the nearest Service Center. -
Page 10: Warranty Policy
Model Brand 100894 MADE-30NX This product is guaranteed for 3 years. To make the warranty valid or purchase parts and components you must present the product in Corregidora 22, Col. Centro, Alc. Cuauhtémoc, CDMX C.P. 06060 or at the establishment where you purchased it, or at any Truper Service Center listed in the annex to the warranty ®...
Need help?
Do you have a question about the MADE-30NX and is the answer not in the manual?
Questions and answers