Panlux H-228/M - Wireless French Plug-In Doorbell Manual

INSTALLATION

Mount the transmitter:
Choose place for transmitter. It should be on visible place, which is protected against rain and extreme heat. It is possible to fix the transmitter by screw or self-adhesive sellotape.

Place the receiver:
Choose suitable wall plug for receiver. Every barrier between transmitter and receiver can reduce operating range of doorbell.

BEFORE USING OR INSTALLING THE DOORBELL, KINDLY READ THE INSTRUCTIONS AND FOLLOW SAFETY RULES.

BATTERY INSTALLATION

OVERVIEW

1. Speaker
   1. 1x - Tune selection
      >4s - Switch to pairing mode
2. Bell button
   1. Standard Mode: Ring the doorbell
      Pairing Mode: Pair the button with the speaker
   2. Nameplate

PAIRING MODE

Initialization of pairing mode is signalized by notification sound (pic. 1) Short push of the bell button will pair it with the speaker. Successful pairing is signalized by a simple notification sound (pic. 2). The pairing mode will end in approx. 10s. This is signalized by a double notification sound.

COMPATIBLE PRODUCTS ARE MARKED WITH THE FOLLOWING ICON

NOTICE

Check the product before using it and make sure that it is not damaged, otherwise do not use it. The reach of the doorbell can be negatively affected by inappropriate placement and mounting or any obstruction between the bell button and the speaker. Please note that this is not covered by warranty. In case of damage do not repair or disassemble the product.

IF THE PRODUCT IS MECHANICALLY DAMAGED OR CONNECTED UNPROFESSIONALLY, GUARANTEE CANNOT BE ALLOWED.