Pci Subsystem Settings - Gigabyte R163-S30-AAB1 User Manual

5-2-4 PCI Subsystem Settings

Parameter
PCI Bus Driver Version
OCP# I/O ROM
(Note1)
OCP# Lanes
(Note1)
OCP# Max Link Speed
SLOT# I/O ROM
(Note2)
SLOT# Lanes
(Note2)
SLOT# Max Link Speed
(Note1) This section is dependent on the available OCP Slot.
(Note2) This section is dependent on the available PCIe Slot.
Description
Displays the PCI Bus Driver version information.
When enabled, this setting will initialize the device expansion
ROM for the related PCI-E slot.
Options available: Enabled, Disabled. Default setting is Enabled.
Change the PCIe lanes. Default setting is Auto.
Configure PCIe max link speed.
Options available: Auto, Gen1, Gen2, Gen3, Gen4, Gen5.
(Note1)
Default setting is Auto.
When enabled, this setting will initialize the device expansion
ROM for the related PCI-E slot.
Options available: Enabled, Disabled. Default setting is Enabled.
Change the PCIe lanes. Default setting is Auto.
Configure PCIe max link speed.
Options available: Auto, Gen1, Gen2, Gen3, Gen4, Gen5.
(Note2)
Default setting is Auto.
BIOS Setup
- 59 -