Rear Projection; Ceiling Mount Installation - Mitsubishi WD380U-EST User Manual

Installation (continued)
Front projection, ceiling mounting
For ceiling mounting, you need the ceiling mount
kit designed for this projector. Ask a specialist for
installation. For details, consult your dealer.
damage caused by use of any non-recommended
ceiling mount kit or installation of the ceiling mount
kit in an improper location.
set Image Reverse in the Installation menu to Mirror
Invert. See page 26.
images may appear darker than those projected in
the case of tabletop mounting. This isn't a product
malfunction.

Ceiling mount installation

If you wish to install the projector using a ceiling
mount, please use the screw holes as the illustration
shows.
Important:
appropriate screws for your type of ceiling. (M4
diameter)
space between the bracket and the projector to
allow for proper heat distribution.

Rear projection

Ask a specialist for installation. For details, consult
your dealer.
Installation menu to Mirror. See page 26.
Caution:
ventilation by the fans, causing damage or failure.
Put a hard board under the projector to facilitate
ventilation.
from the wall to prevent the air inlet grille and the air
outlet grilles that emit hot air from being blocked.
and manners, which may cause fire or electric
shock.
kitchen.
closed car.
Important:
may be damaged.
than 1500 meters.
EN-11