Mitsubishi HC900U User Manual page 23

3. FEATURE menu
ITEM SETTING
MENU POSITION 2 positions
CINEMA MODE AUTO
OFF
VIDEO SIGNAL 8 positions
ASPECT AUTO
4:3
16:9
EXPAND
REAL
PASSWORD FUNCTION
LANGUAGE 10 languages
RESET ALL
4. SIGNAL Menu
ITEM SETTING
HORIZ. POSITION *
VERT. POSITION *
FINE SYNC.
TRACKING
COMPUTER INPUT RGB
YC C
B R/
SET UP OFF
3.5%/7.5%
HOLD
USER
CLAMP POSITION/
CLAMP WIDTH
LPF
• Though horizontal strips may appear on the enlarged projected image, such symptom is not a malfunction.
• Options marked with * become unavailable depending on the type of the input signal.
• When you change the horizontal or vertical position to a large extent, noise may appear.
• The adjustable range of the vertical position varies depending on the type of the input signal. Though the
image may stay in the same position even when the setting value is changed, such symptom is not a malfunc-
tion.
FUNCTION
Use to change the position of the menu.
The film mode will be automatically activated when a film source signal is
inputted.
The film mode will not be activated.
When AUTO is selected, the appropriate video format is automatically
selected depending on the input signal. If the image isn't displayed
correctly, select the desired video format manually.
Select to change the aspect ratio automatically depending on the input
signal.
Select to project images with an aspect ratio of 4:3 when the input signal is
4:3 images.
Select to project images with an aspect ratio of 16:9.
Select to enlarge and project images of CinemaScope size or Vista size.
Select to project images in their original size as input. Not available when
the keystone adjustment is applied.
Use to enable or cancel the password lock. See page 27 for details.
Use to select the language used in the menus.
Use to reset the settings of the menu (excluding PASSWORD, and
LANGUAGE) to the factory setting values.
FUNCTION
Use to adjust the horizontal position of the projected image.
Use to adjust the vertical position of the projected image.
Use to eliminate flickering or blur, if appears, viewing the projected image.
Use to eliminate vertical wide stripes, if appears, viewing the projected
image.
Select this option when connecting the projector to high definition video
equipment having R, G, and B output terminals.
YP P Select this option when connecting the projector to a DVD player or other
B R
device having Y, C
terminals.
Select to make black lighter.
Select to make black thicker.
• When 7.5% is chosen, the brightness is decreased by set-up cancel func-
tion for U.S. Choose OFF, when the image is darkness. (The default
setting is 7.5%.)
Use to adjust the image when flagging occurs near the top of the screen.
Use to correct solid white or solid black in the projected image.
Use to whether or not to enable the LPF.
, and C (or Y, P , and P
B R B
component video output
R)
EN-23