Table of Contents
Advertisement
Menu operation (continued)
Available settings in the menus
Set the following items on their relevant menus.
1. IMAGE menu
opt.
SVGA60
IMAGE
CONTRAST
0
BRIGHTNESS
0
AUTO
CineRichColor
sRGB
OFF
COLOR TEMP.
6200K
COLOR
0
TINT
0
SHARPNESS
0
GAMMA MODE
AUTO
1. IMAGE menu
ITEM
SETTING
CONTRAST
0 - 60
±30
BRIGHTNESS
CineRichColor
AUTO / 0 - 10
sRGB
ON / OFF
COLOR TEMP.
4 positions
COLOR
0 - 20
±10
TINT
SHARPNESS
0 - 10
GAMMA MODE
AUTO
STANDARD
THEATER1
THEATER2
2. INSTALLATION menu
ITEM
SETTING
±20
KEYSTONE
AUTO POWR ON
ON / OFF
AUTO POWER OFF OFF / 5 - 60min
SPLASH SCREEN
ON / OFF
BACK COLOR
BLUE / BLACK
LAMP MODE
STANDARD
LOW
IMAGE REVERSE
OFF
MIRROR
INVERT
MIRROR INVERT
EN-22
2.INSTALLATION menu
opt.
SVGA60
INSTALLATION
KEYSTONE
0
AUTO POWER
OFF
ON
AUTO POWER
OFF
OFF
SPLASH SCREEN
ON
ON
BACK COLOR
BLUE
LAMP MODE
STANDARD
IMAGE REVERSE
OFF
FUNCTION
Use to adjust the contrast of the projected image. (See Page 24.)
Use to adjust the brightness of the projected image. (See Page 24.)
Use to adjust the white level of the projected image. Select AUTO for
normal use. (See Page 24.)
Select whether or not to project emphasizing on the color reproducibility.
Use to adjust the color temperature. (See Page 25.)
Use to adjust the color thickness of the projected image. (See Page 24.)
Use to adjust the color tint of the projected image. (See Page 24.)
Use to adjust the sharpness of the projected image. (See Page 24.)
The appropriate gamma mode is automatically selected depending on the
input signal. Select AUTO for normal use.
Select to secure the contrast even when the room lighting is increased to
some extent.
Select when watching movies in dim lighting as in a theater.
Select to gain the halftone to make the skin color more vibrant even in a
dark scene. This mode is suitable for TV viewing.
FUNCTION
Use to correct vertical keystone distortion.
When ON is chosen, the lamp is automatically lit when the power cord is
plugged in the wall outlet. Choose ON when using the projector mounted on
the ceiling.
• The projector is in the stand-by mode when the lamp is off. Use the
remote control to turn on the lamp.
Use to set the time elapsed before the projector enters the stand-by mode
when there is no signal input from the source.
Choose ON to display the splash screen when the power is turned on.
Use to change the color of the screen that appears when no signal is
supplied.
Select this option in normal use.
Select to moderate the intensity of the lamp. The operating sound is
reduced and the lamp lifetime becomes longer.
• Frequent switching of the lamp mode may damage the lamp.
Select when viewing images from the front with the projector installed on
the floor.
Select when viewing images projected from the behind of the screen with
the projector installed on the floor.
Select when viewing images projected from the behind of the screen with
the projector installed on the ceiling.
Select when viewing images from the front with the projector installed on
the ceiling.
3. FEATURE menu
opt.
SVGA60
FEATURE
MENU POSITION
1.
CINEMA MODE
AUTO
?
VIDEO SIGNAL
AUTO
ASPECT
AUTO
PASSWORD
MENU
FUNCTION
ACCESS
A
LANGUAGE
English
Ë
RESET ALL
OK
4.SIGNAL menu
opt.
SVGA60
SIGNAL
HORIZ. POSITION
0
VERT. POSITION
0
FINE SYNC.
0
TRACKING
0
COMPUTER
RGB
INPUT
R G B
R G B
SET UP
AUTO
HOLD
ON
USER
OK
Advertisement
Table of Contents
