Menu Access - Mitsubishi HC3800 Control Manual

6) Remote commands
screen is being displayed, the splash screen is only canceled.)
Some remote control operations can be achieved by the remote command codes. The remote commands have no
data codes.
Button's name on remote
MENU
ENTER
AUTO POSITION
ASPECT
AV MEMORY 1
[Example] When displaying the MENU selection bar. (Figures and symbols enclosed in quotation marks are
ASCII codes.):
Sending commands
from the PC, etc.
30 30 72 35 34 0D
'0' '0' 'r' '5' '4' ' '
7) Password lock commands
The password lock commands control the password lock. The password lock enabling or disabling command is sent
with a 4 to 8-digit password comprised of any figures 1 to 4 added to the end of the data code. When the password
lock is enabled or disabled successfully, the projector sends a return command comprising the data code, password,
and "1" at the end. When enabling or disabling the password lock fails, it sends a return command with "0" at the
end. There is no reconfirmation of the password. The password input command is for enabling projection of image
when password lock has been set to DISPLAY INPUT. The password input command is sent with a 4 to 8-digit pass-
word comprised of any fi gures 1 to 4 at the end.
ITEM
Password lock enabling/
disabling
Password input
**** is a 4 to 8-digit password comprised of any figures 1 to 4.
[Example] When enabling the password lock of DISPLAY INPUT (in the case that the password is 123412). (Fig-
ures and symbols enclosed in quotation marks are ASCII codes.):
Sending commands
from the PC, etc.
30 30 50 53 4C 4F 43 4B 31 31 32 33 34 31 32 0D
'0' '0' 'P' 'S' 'L' 'O' 'C' 'K' '1' '1' '2' '3' '4' '1' '2' '
(Not executable in stand-by mode. When the remote commands are sent while the splash
ASCII HEX
r53 72h 35h 33h
r2b 72h 32h 62h
r4f 72h 34h 66h
r59 72h 35h 39h
r54 72h 35h 34h
r10 72h 31h 30h
r09 72h 30h 39h
re2 72h 65h 32h
re4 72h 65h 34h
from the projector
30 30 72 35 34 0D
'0' '0' 'r' '5' '4' '
ASCII
PSLOCK 50h 53h 4Ch 4Fh 43h 4Bh
PASS 50h 41h 53h 53h
'
30 30 50 53 4C 4F 43 4B 31 31 32 33 34 31 32 31 0D
'0' '0' 'P' 'S' 'L' 'O' 'C' 'K' '1' '1' '2' '3' '4' '1' '2' '1' '
Button's name on remote
AV MEMORY 2
AV MEMORY 3
CONTRAST
BRIGHTNESS
COLOR TEMP.
GAMMA
SHARPNESS
COLOR
COLOR MANEAGEMENT
Status code
'
HEX
0**** (Disabling), 1**** (DISPLAY INPUT),

2**** (MENU ACCESS)

****
Status code
from the projector
3
ASCII
re5 72h 65h 35h
re6 72h 65h 36h
rd0 72h 64h 30h
rd1 72h 64h 31h
rd4 72h 64h 34h
rd5 72h 64h 35h
rd6 72h 64h 36h
rd2 72h 64h 32h
rb4 72h 62h 34h
Description
Command operating the same as the
MENU button
Command receipt confirmation
(Command echo back)
VALUE
Description
Command for enabling the password
lock of DISPLAY INPUT
Response informing that the
' projector succeeded in enabling the
password lock of DISPLAY INPUT
HEX