Product information/unwrapping Aquarea Delta is a stainless steel indirect water heater. The product is designed for heating domestic hot water from an external heat source such as heat pump, solar panel, gas boiler, biomass etc. Technical data, see table below.
Pipe fitting and connections Pipe fitting: G3 KIT The piping must be fitted in accordance with the current regulations in the area where the product is installed. All HW outlet pipe fitting must be performed by an authorized installer. Exp. vessel Pipe connections: inlet...
Technical Data Specification PAW-TD 20 C1E5-UK PAW-TD 30 C1E5-UK Storage volume - l. Accessible volume of 40°C hot water - l. Weight - kg. Freight volume - m³ 0,46 0,62 Diameter x height - mm. ø595 x 1270 ø595 x 1750 Coil surface 1,8 m²...
Page 6
The mains water supply complies with EU standards current at the date of installation and is not fed with water from a private supply. The Aquarea unvented cylinder has not been modified in any way other than by Aquarea and is only used for the storage of potable water.
Need help?
Do you have a question about the PAW-TD 20 C1E5-UK and is the answer not in the manual?
Questions and answers