Table of Contents
Advertisement
Prepare for Service Safety
Warn others of service work. Always park and prepare
your machine for service or repair properly.
•
Park the machine on a level surface, and lower
equipment to the ground.
•
Disable the pilot hydraulics. Turn the pilot reset switch
to OFF.
•
Stop the engine.
•
Attach a "Do Not Operate" tag in an obvious place in
the operator's station.
Always lower the attachment to the ground before you
work on the machine. If you must work on a head or
attachment, securely support the attachment.
Do not support the machine on cinder blocks, hollow tiles,
or props that may crumble under continuous load. Do not
work under a machine supported solely by a jack. Follow
the recommended procedures in this manual.
Understand service procedures before beginning repairs.
Keep the service area clean and dry. Use two people
whenever the engine must be running for service work.
Safety: Maintenance Precautions
1-4-1
t7m7g6m,1652940470011 -19-19MAY22-1/1
053122
PN=33
Advertisement
Table of Contents
