Kyocera PA2000w Frequently Asked Questions Manual page 13

6.
Configure the settings.
1 Select "Do not use WPS".
3 Select an access point you want to
connect the device, and then click Next.
5 Select the check boxes of functions you
want to use with Wireless Network
connection, and click Finish.
The network between this machine and the
computer is configured.
Note: Event if show "Setup Complete", If you
have the problems communicating with the
access point, please check that access point
information you set is correct. To reconfigure
the settings, uninstall the drivers and utilizes,
and reinstall them again.
FAQs PA2000w
2
Press next.
4 Enter the pre-shared key, and then
click Next.
13