Home Decorators Collection HATTERAS Use And Care Manual page 6

Installation (continued)
3
Installing the fixture
□ Push all excess wires into the outlet box.
□ Line up the hole of backplate (H) with the nipple
(FF), and then secure the backplate (H) to the wall
with the finial (GG).
4
Installing the bulb
□ Prior to installing the bulb, inspect socket for
silica packet. If packet is present, then remove and
throw away. Do not expose it to children or pets.
□ Install a 120V, 60HZ, 60-watt max.,
medium-base, type A bulb (not included) into the
socket (I).
□ Raise the lantern cage (J) to the bottom of roof
(D), and secure with the two plastic washers (G) and
the two thumb screws (F).
5
Installing the font
□ Screw the nipple (M) to the coupling (K) and
secure with a nut (L).
□ Slide the font (N) over the long nipple (M) and
secure with the ball finial (O).
6