Download Print this page

Humanware BrailleNote Touch Plus Quick Start Manual

Set-bc

Hide thumbs Also See for BrailleNote Touch Plus:

1.1 BrailleNote Touch Plus: Adjust Braille Settings

To set the Braille code and grade on the device, you

need to configure the Language Profile.

Press SPACEBAR + O to open the Options menu.

To navigate to and select Configure Language

Profiles, use first letter navigation "C," or navigate

using the NEXT thumb key, then press ENTER or a

cursor routing key.

Select Primary Language Profile or the language

profile you wish to configure by pressing ENTER or a

cursor routing key.

www.setbc.org

105 – 1750 West 75th Avenue, Vancouver, B.C., Canada V6P 6G2

Phone: 604.261.9450

Page 1 of 3

Fax: 604.261.2256

www.setbc.org

SPACEBAR + O

ENTER

January 2021

Table of Contents

Need help?

Do you have a question about the BrailleNote Touch Plus and is the answer not in the manual?

Page 1 105 – 1750 West 75th Avenue, Vancouver, B.C., Canada V6P 6G2 Phone: 604.261.9450 Fax: 604.261.2256 www.setbc.org 1.1 BrailleNote Touch Plus: Adjust Braille Settings To set the Braille code and grade on the device, you need to configure the Language Profile. Press SPACEBAR + O to open the Options menu.
Page 2 To navigate to and select Preferred Braille Grade for Entry, use first letter navigation, press “P.” By default, the setting should be set to “Literary braille.” The other option is for computer braille. If you’re fine with “Literary braille,” do nothing. To configure this setting, press ENTER.
Page 3 In Canada, the braille standard is to use the contracted UEB code. This setting is listed as “English UEB Duxbury grade 2.” To quickly navigate to and select “English UEB Duxbury grade 2”, use first letter navigation, press “E.” Then tab to your selection using the Next Next button and press ENTER to select the braille grade for entry.