Index EVEREST Service Manual page 50

Index Everest Servicemanual v 3.0
Fault detection
Fault Possible explanation Possible solution
Cable fault/twisted
Panel fault
Decoder circuit fault
Paper handling Pick up not working
problem correctly
My own tables Load them from
is not on the old software
new software
Get latest Take it from our home
software page at:
http://www.braille.se
No referens puls Cable faulty or not
connected
Magnetic sensor
position and function
50
BOX 155 • S-954 23 GAMMELSTAD • SWEDEN • PHONE +46-(0)920 203080 • TELEFAX +46-(0)920 203085 • E-MAIL info@indexbraille.com • http://www.indexbraille.com
Check cable see page 28
Check panel see page 27
Exchange decoder circuit, UXX
See page xx user manual and page 26 in service
manual
a) copy "ownxx.s10" from old to new software
b) copy "owntab.evp" from old to new software
a) click on the software you need and select if the
name and position is OK.
b) name EVXXXYYY.EXE where XXX is the
language, YYY is the version no.
c) Move the file (example eveng801.exe) to a
temporary directory (c:\temp)
d) Extract the file (example eveng801.exe) with the
command "eveng801.exe -d".
This will extract the files and directories on TEMP
directory.
e) Delete source file (example eveng801.exe) on
the temp directory.
f) Run "install.exe". This will install the software
on directory c:\Everest\ev801 and start up the
program to install on Everest.
g) Next time you start the program run "everest"
on c:\Everest\ev801 and follow the menu
instruction.
Check cable, page 28 and see if LED will be lighted
when moving the printing head
Check sensor function with magnet if the LED
goes on, if OK move the indicator board and or
twist magnet (inside holder) 180 degrees.