Ei Electronics Ei1529RC Instructions

WEEKLY TESTING
• Test Alarm – use to test the Smoke/Heat Alarms remotely.
1. Press the Test Alarm switch
Now check all the alarms sound and the red lights
on the covers flash rapidly. Then turn off the Test
Alarm switch.
This is equivalent to pressing the test button on all
alarms simultaneously.
It also checks that the remote control is receiving
mains power.
2. If the alarms do not sound
Check for the green mains light on the front cover
of the alarms.
If all alarms do not have the green mains light on,
check fuses, circuit breakers etc. (see Smoke/Heat
Alarm instructions for further details).
FIVE YEAR GUARANTEE
Ei Electronics guarantees this product for five years from date of purchase against any defects that
are due to faulty materials or workmanship. This guarantee only applies to normal conditions of use
and service, and does not include damage resulting from accident, neglect, misuse, unauthorised
dismantling, or contamination howsoever caused. This guarantee excludes incidental and consequential
damage. If this product should become defective within the guarantee period, it must be returned, with
proof of purchase, carefully packaged, with the problem clearly stated (see addresses below). We shall
Block E1
at our discretion repair or replace the faulty unit. Do not interfere with the product or attempt to tamper
with it. This will invalidate the guarantee, but more importantly may expose the user to shock or fire
hazards. This guarantee is in addition to your statutory rights as a consumer.
The crossed out wheelie bin symbol that is on your
product indicates that this product should not be disposed
of via the normal household waste stream. Proper
disposal will prevent possible harm to the environment or
to human health. When disposing of this product please
separate it from other waste streams to ensure that it can
be recycled in an environmentally sound manner. For
more details on collection and proper disposal, please
contact your local government office or the retailer where
you purchased this product.
Aico Ltd. Mile End Business Park,
Maesbury Rd, Oswestry,
Shropshire SY10 8NN, U.K
Tel: 01691 664100
www.aico.co.uk
Ei Electronics. Shannon, Ireland.
Tel: +353 (0)61 471277
www.eielectronics.com
4
REMOTE CONTROL
WARNING: For use only with the following models:
Smoke/Heat/CO Alarms - 2100 Series, 140RC Series, 160RC Series, 160e Series,
Ei261ENRC & Ei261DENRC
Accessories - Ei128RBU, Ei169/160, MCP401RC
DO NOT use any other models with this remote control
Fire Alarms
The Remote Control is recommended for
Control Switch
use in systems comprising of three or more
interconnected Alarms.
The Remote Control should be wall mounted at
standard light switch level (1.2m from floor level)
Locate Test Silence
to allow easy access.
Alarm Alarm Alarm
If alarms sound, press to allow the source of alarm to
LOCATE ALARM:
be identified audibly.
SILENCE ALARM: Press to silence nuisance alarms.
TEST ALARM:
Operate weekly to test the alarms. Can also be used
to give a manual alarm
MAINS CHECK: TheTest Alarm switch will not sound the alarms in the
absence of mains power.
Position the Remote Control in a location that will allow it
to be easily accessed. In the majority of installations this
will be in a hallway, possibly next to the master bedroom.
It should be installed at the standard light switch height
Bedroom Landing Bedroom
(1.2m from floor level).
The Remote Control can be surface mounted using
the mounting box provided or alternatively it can be
Hallway
recessed into a standard back-box (not included).
If a metal back-box is used it must have a minimum depth of 35mm.
Up to four Ei1529RC System Remote Controls can be used in a system.
© Ei Electronics 2015
SWITCH
Ei1529RC
INSTRUCTIONS
SITING
P/N B16112 Rev3
1
Model