JLab Rewind Wireless - Retro Headphones Manual

FIRST TIME SETUP: BLUETOOTH PAIRING

PAIRING NEW / ADDITIONAL DEVICES

Turn OFF Bluetooth on your previously paired device and turn ON Bluetooth on new device.
Repeat FIRST TIME STEUP process for new devices.

Notes:

• Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device. The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).
• Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future. Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.
• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.

CHARGING

Note: Headphones will not turn on while charging. Allow about 3 hours to fully charge.

Connect the Rewind Headphone to a computer or USB 5V output device with the provided charging cable.
Red light will indicate charging and blue light will indicate a full charge.

BUTTON FUNCTIONS

BLUETOOTH PAIRING: (Follow First Time Setup instructions)
POWER ON: Press & hold 2 seconds
POWER OFF: Press & hold 4 seconds (slow blinking blue light indicates power is on)
PLAY / PAUSE / ANSWER / HANG UP: 1 click
ACTIVATE SIRI (iOS) OR "OK GOOGLE" (ANDROID): 2 click
TRACK FORWARD: Press & hold 2 seconds

EQUALIZER MODES
TOGGLE EQ CHANGE
3 click. (Rewind will cycle 3 EQ settings)
JLab SIGNATURE (One Beep)
JLab C3™ signature sound with amplified vocals and bass
BALANCED (Two Beeps)
Even sound with no additional sound enhancements
BASS BOOST (Three Beeps)
Amplified bass and sub-bass

• Avoid getting moisture or liquids on the headphone cups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
• Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use.

Shop products | Product alerts | Burn-in your headphones
JLab Audio + Burn-in Tool