JLab Studio Pro Wireless - Over-Ear Headphones Manual

Table of Contents

Contents

1 FIRST TIME SETUP: BLUETOOTH PAIRING
2 PAIRING NEW / ADDITIONAL DEVICES
3 BUTTON FUNCTIONS
4 CHARGING
5 Documents / Resources
- 5.1 References
- 5.2 Download manual

FIRST TIME SETUP: BLUETOOTH PAIRING

Turn on the Bluetooth in your device settings.
When the Studio Pro Wireless Headphones are powered off, press and hold the Power Button for approximately 8 seconds.
Select "JLab Studio Pro" in your device settings to connect.

(When the headphones are paired, voice prompts "You are connected" and blue light will flash slowly.)

PAIRING NEW / ADDITIONAL DEVICES

Turn OFF Bluetooth on your previously paired device and turn ON Bluetooth on new device.
Repeat FIRST TIME STEUP process for new devices.

Notes:

Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device. The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).
Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future. Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.
If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.

BUTTON FUNCTIONS

BUTTON FUNCTIONS
VOLUME UP: Click once
TRACK FORWARD: Click & hold 2+ seconds
VOLUME DOWN: Click once
TRACK BACKWARD: Click & hold 2+ seconds
POWER ON / OFF: Click & hold 2+ seconds
PLAY / PAUSE / ANSWER HANG UP CALLS: / Click once
REJECT INCOMING CALL: Click & hold 1 second
ACTIVATE SIRI (iOS) OR "OK GOOGLE" (ANDROID): Click twice
BLUETOOTH PAIRING: See FIRST TIME SETUP
CHANGE EQ: Press both buttons simultaneously (Studio Pro will cycle 3 EQ settings)

JLab SIGNATURE (One Beep)
JLab C3™ signature sound with amplified vocals and bass
BALANCED (Two Beeps)
Even sound with no additional sound enhancements
BASS BOOST (Three Beeps)
Amplified bass and sub-bass

CHARGING

Connect the USB Type C charging cable (included) to the headphone and connect to a computer or USB 5v/1amp output device (not included). Make sure the USB connection has a power output source.

Solid red light indicates the headphone is charging.
Solid blue light indicates charging is complete.

Avoid getting moisture or liquids on the headphone cups.
Avoid extreme heat, cold, and humidity.
Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
If you experience regular discomfort while using this product, discontinue use and consult your physician.
We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use.

Shop products | Product alerts | Burn-in your headphones
JLab Audio + Burn-in Tool

JLABAUDIO.COM

YOUR WARRANTY
All warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlabaudio.com or visit jlabaudio.com/contact