MD SPORTS 16602 Assembly Instructions Manual page 7

7. Thread the wire of Goal (#6) through the openings of the End Apron and support of the Playfield to the Connect
Box(#20), and then plug the puck catcher wire into the connect box (#20). See FIG 2A.
8. Attach the Goals (#6) to each End Apron using four Screws (#8) per Goal. See FIG. 2.
9. Attach the Electronic Scorer (#10) to the Side Apron using three Screws (#8). See FIG. 2B
10.
Thread the Wire of Electronic Scorer (#10) through the opening of the Side Apron to the Connect Box (#20), and then
plug the Scorer wire into the Connect Box (#20). See FIG. 2A.
FIG.2
8
6
8
Electronic Scorer Schematic Diagram
11. Insert the Table Tennis Post (#18) into the middle of the Table Tennis Board (#17) as shown in FIG.3. Then slide
the Table Tennis Net (#19) into the Table Tennis Post.
FIG.3
FIG.3A
19
18
17
View = Underneath Table
17
18
10
1
FIG.2A
19
6
FIG.2B
8
Scorer wire
Connect Box
20
Puck catcher wire