Do you have a question about the WZ6012 and is the answer not in the manual?
Questions and answers
Sulaiman Gool
March 2, 2025
WEGE WZ6012. My unit is connected to a 12V battery but I can't increase V-Set beyond 10.73V. Tried all settings for I-Set or P-Set or OVP or OIP
The unit came without a manual.
Page 27
Instructions for the use of CNC dc stabilized power supply Product model WZ6012 Revision time 2020/10/08 Version No V1.0 Version No. note: in order to better understand and use all functions of the product and obtain a good user experience, please read the product manual carefully to avoid misoperation.
Page 29
The power input interface must be strictly connected to the regulated dc power of 9-70V (do not connect to ac power or power beyond the voltage range. Otherwise the product will be burnt!)When the current or power or temperature is too high, the fan is turned on; otherwise, the fan is turned off.
Page 30
1.2 Product technical indicators 1.3 Product core functions 1.8-inch HD color display Android app / PC upper computer 4 groups of quick storage calls Multiple display interfaces Extended external Integrated panel for easy assembly USB / RS485/WIFI Multiple protection 1.4Operating instructions After power on, if WIFI mode is set in the menu, connect WIFI server first, and then display the power on interface, otherwise directly display the power on interface, and then enter the main...
Page 31
Data display interface Statistics interface Curvilinear interface 1.4.2 instructions In the menu operation, the red shadow is the currently selected menu, and the blue is not selected. Press the direction key to move the cursor or switch the menu, and then press OK to confirm.
Page 32
1.4.2.1 Main interface voltage and current settings, protection settings ,Voltage Voltage setting:Press the voltage setting key setting is selected (curve display interface setting will automatically jump out),Set the selected bit to display in reverse red,Shift left and right buttons,Turn the rotary encoder to increase clockwise and decrease anticlockwise.
Page 33
decrease anticlockwise. Setting complete, Press key、 other setting buttons, exit and save the setting value. Overcurrent protection settings:Press the protection setting , Overvoltage protection setting is selected (curve display interface setting will automatically jump out),Press the ,The overcurrent protection protection setting key again setting is selected, and the selected bit is displayed in reverse red,...
Page 34
1.4.2.2 Fast storage and recall Long press up, left and right 4 direction keys to call out M1, M2, m3 and M4. Set the current output voltage, output current, over-voltage protection and over-current protection values, and set the automatic storage. 1.4.2.3 Key lock unlock Long press key More than 2S,You can lock or unlock the...
Page 35
1.4.2.5 System settings Press the rotary encoder key MENU,Enter the system setting menu interface. Press the direction key to select the setting option. The red reverse display is the selected position. Rotate the encoding potentiometer to change the setting. 1) Adjust the main display interface, and you can choose digital classic interface or curve display interface.
Page 36
under WIFI is fixed as 115200. 5) The system language can be set to simplified Chinese and English. 6) When the power on output is turned on, the power output will be turned on automatically after the power on. When the power is turned off, the power output will be turned off.
Page 37
13) The dialog box will be opened after the factory confirmation is restored. This operation can be performed when there is an exception in the use process to restore the factory settings. Press the left and right keys to confirm or cancel, and press the OK key to exit.
Page 40
Click the menu icon to open the sideslip interface, click the address selection, and the operation is as shown in the figure.
Page 41
The language option in the sideslip interface is similar to the option operation and address selection. Click to enter the interface for operation.
Page 44
It should be noted here that the app should be opened first, and then the WZ6012 should be opened to set the communication interface mode of WZ6012. The app is only used in WIFI mode. The specific operation is shown in the figure above...
Page 45
Please refer to the following picture for specific operation steps, and pay attention to the operation sequence in the next step 2. Wait until the IP address appears on the WZ6012 interface...
Page 49
Instructions for installation and use of upper computer software Installation software requirements: win7 and above systems need to be installed with net framework 4 or above. If the computer does not have one, please install it yourself. This software is developed by our company without virus. If the antivirus software prompts, please allow all its functions, otherwise it will affect the normal operation of the software.
Page 50
,Open the Open package software,Double click Icon software. Connect the device with USB or RS485 module through USB data line or USB to RS485. Select the communication port number and click open, The indicator turns red after success. Then choose the device address,Click to connect device,Indicator state turns green after work.
Page 51
Appendix 1 Communication Protocol Frame format command:Frame length is 20, The format is as follows: Synchro Power Command 4-19 bytes are related Check head address word information content code When the device receives a frame setting command, The command of this frame will be verified.
Page 52
Command register content word 0x20 Set operation mode (0 is panel operation mode, 1 is remote operation mode) 0x21 Set new address (1-255) 0x22 Set power output status (0 is output OFF, 1 is output ON) 0x71 Set time capacity energy statistics operation state 0 suspend 1 operation 0x72 Clearing time capacity energy statistics...
Page 53
Read Read the next highest byte of the current time value current Read the next lower byte of the current time value information Read the low byte of the current time value Read the high byte of the current energy value Read the next highest byte of the current energy value Read the second lowest byte of the current energy value Read the low byte of the current energy value...
Need help?
Do you have a question about the WZ6012 and is the answer not in the manual?
Questions and answers
WEGE WZ6012. My unit is connected to a 12V battery but I can't increase V-Set beyond 10.73V. Tried all settings for I-Set or P-Set or OVP or OIP The unit came without a manual.