Sanjet BP-106 Quick Start Manual

Sanjet
1. Press red button on side of machine to turn on.
2. Wait approx. 20 seconds for Sanjet logo on the screen to change
to the Main Screen.
3. Press the "Edit" screen and select Edit Single file.
4. Press "Text" to create a message.
5. Press "edit" small box next to line that reads "input Text"
6. This will bring up the keyboard and press "Empty"
7. This will clear any text that is in the "input Text" box.
8. Use the keyboard to create your text and press "finish"
9. The next screen will allow you to move the print in the X or Y
position.
10."Rotate" will allow you to rotate the message.
11. The software has a few "fonts" including OCR's
12. "Size" will determine the size of the font.
13. "Interval" lets you repeat the print on your substrate.
14. You can touch and drag the message with your stylus pen.
15. Once you are satisfied with your message press "File" and press
Save As
16.This will bring you to the Save File page. Name the file and press
OK.
17. Now press "File" again and press exit.
18. This will take you to the main screen. Press The "message" Tab
19. If you save it correctly your message will be listed in the Browse
Files section.
BP-106 Printer Quick Start