Sanjet BP-106 Quick Start Manual

Editing you message on the
1.The "Settings" tab.
A. "Systems Setting"
1.Language change to desired language and press OK
2. Adjust to day dates if needed.
3. Voltage: This is set at the factory, however if you plan to use white or
4. Pulse Width: This is set by the factory, however if you plan to use white
5. Brightness: Brightness of the screen
6. AutoSelected: will automatically set the voltage and pulse width of the
7. Sound: will beep when prints.
8. Calibrate: for trouble shooting purpose.
2. Print Settings
1. Under "style"
1. Print Mode there are 4 settings. to use as a manual printer Key
Trigger should be highlighted. You can purchase a conversion kit stand
and convert this manual printer into an in-line automatic printer. You
would change the setting to External Sensor.
2. Speed This control the spacing between the letters. The lower the
yellow ink you will need to change this value. The voltage
value is printed on the ink cartridge.
or yellow ink., you will need to change the pulse width.
pulse width is printed on the ink cartridge.
Ink cartridge installed.
Sanjet BP-106