Table of Contents
Advertisement
Still Image Menu (Function)
1. Slide the mode switch to [
2. Press the MENU button, and select the
[Function] menu with the
[Function] menu is displayed.
3. Select the desired [Function] option item
with the
button to enter its respective menu.
4. Select the desired setting with the
buttons, and press the SET button.
5. To exit from the menu, press the MENU button.
Capture Mode
This sets the recording method at the time of capturing images.
* [Blank] Single:
* [
] Continuous:
* [AEB] AEB:
* [
] Burst + flash
* [
] Burst
Voice Memo
Refer to section in this manual titled "Recording Voice Memos" for further
details.
* On / Off
56-EN
].
button.
/
buttons, and press the SET
Capture an image at a time.
Permits continuous photography of 3 images max.
Permits 3 consecutive images in the order of standard
exposure, underexposure and overexposure
compensation.
The "Burst+flash" capture mode lets you shoot a
sequence of 3 pictures with flash.
The "Burst" capture mode allows you to fully use the
available memory capacity (internal or via memory
card) by pressing and holding the shutter button. As
long as you hold the shutter button pressed, pictures
are captured until the memory capacity is exhausted.
In [Continuous], [AEB], [Burst + flash] and [Burst] capture mode, the
voice memo is automatically fixed at [Off].
When [Voice Memo] is set to [On], the preview setting is also fixed at
[On].
/
Advertisement
Chapters
Table of Contents
