Related Manuals for Flushmate 501-A Series
Summary of Contents for Flushmate 501-A Series
- Page 5 Owner’s Service Manual 501-A Series FLUSHMATE ® FLUSHOMETER - TANK SYSTEM 501-A Series A Division of Sloan Valve Company 30075 Research Drive • New Hudson, MI 48165 800-533-3450 • 248-446-5300 http://www.flushmate.com...
- Page 6 Compared to other types of 3,817,279 3,817,286; 3,817,489; 3,820,171,754; 4,233,698 and 5,802,628. Also covered by various foreign patents (country and low consumption water closets, FLUSHMATE offers many distinct advantages. number available upon request) and other patents pending. Outstanding FLUSHMATE ®...
- Page 7 A newly installed toilet that does not shut off may be caused by inadequate or low pressure, and is usually the result of an insufficient water supply flow rate into the FLUSHMATE Vessel. (NOTE: The recommended static pressure range by code is 20 p.s.i. to 125 p.s.i.).
- Page 8 Step 6. If the Tank continues to run on, push down lightly on the Flush Valve Actuator. If the water stops running, it is an indication that the Flush Valve Cartridge requires tightening (clockwise). If water still runs on while pushing down on the Actuator, the Flush Valve Cartridge requires loosening (counter-clockwise).
- Page 9 Step 7. Follow Step 3 above and in reverse to re-connect water and check for leaks. WINTERIZING___________________________________________________________________ The Sloan FLUSHMATE ® , when installed in a summer home, cottage or cabin, can be winterized to allow for periods for non- use especially when the dwelling is subject to frigid conditions.
- Page 10 Cartridge and turning counter-clockwise. • It is normal for less than an inch of water to remain in the bottom of the outside China Tank. The FLUSHMATE ® System will automatically recirculate this water with each flush to eliminate any stagnant condition.