Owner's Manual
The Viking VP3000 Axial Air Mover features patent
TM
pending FOCUS
Technology. FOCUS
revolutionizes evaporative drying by producing air
velocities greater than competitive product offerings.
This highly focused air flow is directed towards the
restoration industry's problematic drying areas
namely, carpet and pad, sub-floor, sill plate and
walls. The Viking VP3000 Axial Air Mover with
FOCUS
TM
Technology sustains these air velocities
further than any other axial air mover.
The Viking VP3000 Axial Air Mover includes a
2-speed motor delivering a focused airstream of
approximately 3000 cfm and a lightweight stackable
enclosure designed to fit existing vehicle rigging,
on-board duplex GFIC outlet, circuit breaker, and
superior cord namagement.
Focused Air Flow
Power Management
Packaged for Use
Weight
Housing
Long-life Motor
© 2006 Copyright Therma-Stor LLC
|
Viking VP3000 Axial Air Mover
Read And Save These Instructions
TM
Technology
TM
FOCUS
Technology Features & Benefits
• Approximately 3000 CFM air flow directed where you need it. Patent
pending FOCUS
TM
and floors to dry the sill plate quickly
• Operator interface conveniently located for easy access, featuring:
three-position switch, circuit breaker and GFCI outlet.
• Comes "ready-to-use" in the box.
• Unique offset handle promotes ease-of-use.
• Units interlock for ease of stacking during storage and handling.
• More pleasing sound than competitive units.
• Weighs 2.5 lbs less than competitive units.
• Linear low density polyethylene construction.
• Unique housing and matched blade/motor result in quiet operation.
• Easily serviced.
• Low bearing temperatures increase motor life.
• Permawick
®
Lubrication.
Technology directs air towards the corner of walls
Viking VP3000 Axial Air Mover
Owner's Manual TS-341
1