Fujitsu ScanSnap S300 Cleaning Instructions page 2

PFU Imaging Solutions Europe Ltd
Turn the Scanner
To rotate the Feed and Eject Rollers, open the ADF and hold down the SCAN button for three seconds
while the power lamp lights is blue. The rotation can be repeated as long as the ADF is open.
As a guideline, seven presses of the POWER button make the rollers rotate one full turn.
Feed Rollers x 2
Clean lightly taking care not to roughen the surface.
Eject Rollers x 2
Clean lightly taking care not to roughen the surface.
Plastic Rollers
Pad Assy
Glass
ON while cleaning the following locations
Using F1 Impregnated Cleaning Wipes
Hold down the SCAN button for three seconds
Rollers will rotate
F o r f u r t h e r i n f o r m a t i o n p l e a s e r e f e r t o t h e
S c a n S n a p S 3 0 0 / S3 0 0 M O p e r a t o r s G u i d e
w hi c h c an b e f o u n d o n o u r W e b si t e :
h t t p: / /w w w . f uj i t s u . c o m / e m e a / p r o d u c t s /
J a n u a r y 2 0 1 0
Cleaning Instructions for ScanSnap S300/S300M
Eject Rollers
Feed Rollers
Pick Roller
White Sheets