Enabling Devices Peek-a-Boo 7508M User Manual

8. Turn the unit on by turning the ON/OFF/Sensitivity knob switch, found on the
back of the unit, clockwise. This knob also controls the sensitivity of the bead
chains, turning the knob clockwise will decrees sensitivity, requiring more
movement of the beads to activate. Turning the knob counterclockwise will
increase sensitivity, thus requiring less movement of the beads to activate.
9. When you manipulate the beads in any way, you will be rewarded with music,
lights and vibration!
10. Once you stop moving the beads, there will be a brief delay, and then the
features will stop.
11. To turn On or Off the desired stimuli (1 – Light; 2 –Music; 3 Vibration), push
the small white rocker switches to the On or Off position.
12. To use this unit as a switch to control other devices, plug one end of the supplied
double ended cord into the jack on the side of the Peek-a-Boo Mirror. Next plug
the other end into your adapted devices. Moving the beads will activate your
device, as well as the selected stimuli. Once you stop moving the beads, there
will be a brief delay and then your device will shut off.
Troubleshooting:
Problem: The Peek-a-Boo Mirror does not work.
Action #1: Check or replace the batteries with fresh new batteries.
Care of Unit:
The Peek-a-Boo Mirror can be wiped clean with any household multi-purpose
cleaner and disinfectant.
Do not submerge the unit, as it will damage the contents and the electrical
components.
Do not use abrasive cleaners, as they will scratch the surface of the unit.
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-TEC-TOYS or 1-800-832-8697
customer_support@enablingdevices.com
Mountable Peek-a-Boo Mirror #7508M
& 7508 Mini Peek-a-Boo Mirror W/
Mounting Arm
USER'S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com