Table of Contents
Advertisement
RIDE-ON FAMILY
OWNER'S MANUAL
TITAN TRANSPORTER INSTRUCTIONS
1. Remove the steering handles and fold the seat
down. Locate the transport pins on the front and
back of the chassis.
2. Angle the transporter so that the frame is almost
vertical.
3. Roll the transporter over the machine, aligning the
transporter brackets with the pins. Lift the
transporter to connect the brackets with the pins.
Then lower the wheels to the ground keeping the
bracket and pins connected.
4. Bring the handle down and fit the pickup bar on
the lowest ring of the chassis.
5. Slide the hitch pin into the pickup bar to secure it
on the ring. Attach the cotter pin to the bottom of
the hitch pin.
6. Use the handle to transport the Ride-On Trowel.
18
OIPB – B19007
Advertisement
Table of Contents
