Table of Contents
Advertisement
Fault
The appliance is not
working.
The programme does
not start.
The door cannot
be opened.
The water is not drain-
ing.
Cause and troubleshooting
Check whether the lighting in your kitchen or other
▶
appliances are working.
You have not pressed Avvio / Reload.
Press Avvio / Reload.
▶
Door is not closed.
Close the door.
1.
Press Avvio / Reload to start the programme.
2.
Childproof lock is activated.
→ "Deactivating the childproof lock", Page 39
▶
Fine fra is activated.
Check whether Fine fra is activated.
▶
→ "Buttons", Page 22
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Avvio / Reload to start the programme.
4.
– –– is activated.
Continue the programme by selecting Centrifuga
▶
or Scarico acqua and pressing Avvio / Reload.
→ "Resuming the programme when the programme
status is Rinse Hold", Page 38
The temperature is too high.
Wait until the temperature has dropped.
▶
→ "Cancelling the programme", Page 38
▶
Water level is too high.
Start the Scarico acqua programme.
▶
Power failure.
Open the door using the emergency release.
▶
→ "Emergency release", Page 55
Drain pipe or water outlet hose is blocked.
Clean the drain pipe and the water outlet hose.
▶
Drain pipe or water drain hose is caught or jammed.
Ensure that the drain pipe and water drain hose are
▶
not kinked or trapped.
Drain pump is blocked.
→ "Cleaning the drain pump", Page 43
▶
– –– is activated.
Troubleshooting en
49
Advertisement
Table of Contents
