Table of Contents
Advertisement
en Troubleshooting
Fault
"E:35 / -10"
lights up.
flashes.
All other error codes.
The appliance is not
working.
48
Cause and troubleshooting
The water pressure is low.
No remedial action possible.
The filter in the water inflow is blocked.
Clean the water inflow filter → Page 45.
▶
The tap is turned off.
Turn on the tap.
▶
The water inlet hose is kinked or jammed.
Ensure that the water inlet hose is not kinked or
▶
jammed.
There is water in the base trough.
Turn off the water tap.
▶
Call the after-sales service.
▶
→ "Customer Service", Page 57
The appliance is leaking.
Turn off the water tap.
▶
Call the after-sales service.
▶
→ "Customer Service", Page 57
The temperature is too high.
Wait until the temperature has dropped.
▶
→ "Cancelling the programme", Page 38
▶
Water level is too high.
Start the Scarico acqua programme.
▶
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Avvio / Reload to start the programme.
4.
Door is not closed.
Close the door.
1.
Press Avvio / Reload to start the programme.
2.
Malfunction
Call the after-sales service.
▶
→ "Customer Service", Page 57
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Advertisement
Table of Contents
