Advertisement
with ranger wall kits
2.5.2 First align the wall brackets to the wall mounting track kits, then install the wall brackets
to the wall mounting track kits using channel nuts.
OTE: Tighten the bolts that used to attached the wall bracket to the wall or wall kits 1
N
before the bolts that used to attached the wall bracket to the end panel.
IMPORTANT: After installation is completed, ensure all bolts are properly tightened.
For technical support, contact us at 1-800-565-5321
st
TOOLS
q Cordless Impact
q 1/2" Socket
FASTENERS USED
4×
wall kits fastener kit
#90-212 Hex Bolt 5/16" × 1-1/4"
#98-122 Lock Washer
#98-116 Flat Washer
#94-150 Channel Nut
C4-BA11-3 Installation Guide | REV. A1 | Page 15
Advertisement
