Samsung RF30HB Series User Manual page 18

When moving your refrigerator
To prevent fl oor damage, be sure the front
adjusting legs are in the up position (above
CAUTION
the fl oor).
Refer to 'Adjusting the Level' in the manual
(on page 23).
Flat-blade screw Flat-blade screw
Control Lever Control Lever
driver(-) driver(-)
Flooring
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the fl oor.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the fi nish of the fl ooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back. Do not wiggle it
from side to side.
DA68-03030C-01.indb 18 DA68-03030C-01.indb 18
ACCESSORIES AND REQUIRED
TOOLS
The following accessory is included with your
refrigerator:
Shim Hinge Middle
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips Flat-blade screw
screwdriver (+)
Pliers
English - 18
2EA
Socket wrench
driver (-) (10 mm)
Allen wrench
(5 mm)
2015. 5. 7. 2015. 5. 7. 8:28 8:28