Acer AMR200 User Manual page 6

Setup the Connection between the
Receiver and the Mouse
1. Insert the battery into the mouse, then follow the steps
below.
2. In the meantime, to open the cover under the mouse,
take the nano receiver out.
3. Plug the Nano receiver into the USB port on your
computer.
4. If the device does not work, please turn it into pairing
mode.
5. Pairing: Re-plug the receiver into the USB port on your
computer, then press connect button of the mouse
"middle + right". If the mouse does not work after 10
seconds, pair them again.
(The receiver has auto pairing function).
5