AOC L42H861 Service Manual page 11

42"LCD TV
Using the Antenna or Cable for your VCR
1. Turn off the power to the HDTV and VCR.
2. Connect the "Output to TV", "RF Out" or "Antenna Out" connector on the rear of your VCR to the
ANTENNA/CABLE DIGITAL/ANALOG connector at the rear of the HDTV.
3. Turn on the power to the HDTV and VCR.
4. Select TV using the INPUT button on the remote, side of the HDTV or directly by pressing the TV button on
the Remote Control.
Note: If you have an off-air antenna or cable TV, connect it
to the "Antenna In" connector on the rear of your VCR.
Connecting Your HDTV Set-Top Box
Using HDMI
HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV
for optimal results.
Connecting your HDTV Set-Top Box (Best)
1. Turn off the power to the HDTV and HDTV Set-Top Box.
2. Connect a HDMI cable to the HDMI output of your HDTV Set-Top Box and the other end to the HDMI Input at
the rear of the HDTV.
3. Turn on the power to the HDTV and HDTV Set-Top Box.
4. Select HDMI using the INPUT button on the remote, side of the HDTV, or directly by pressing the HDMI
button on the Remote Control.
Note:
a) The HDMI input on the HDTV supports High-bandwidth Digital
Content Protection (HDCP).
between the video source and the digital display for added security
and protection.
b) Refer to your HDTV Set-Top Box user manual for more information
about the video output requirements of the product or consult your
cable or satellite operator.
HDCP encrypts the transmission
11
AOC L42H861