Advertisement
4.
Attach the right skid skirt to the right rubber baffle using a carriage bolt (5/16 x 7/8 inch) and nut (5/16
inch) as shown in
1. Nut (5/16 inch)
2. Nut (1/4 inch)
3. Right rubber baffle
5.
Secure the right side of the rubber baffle and skid skirt together as shown in
Note:
If the blower mount bracket has the hole shown in
nut (1/4 inch), carriage bolt (5/16 x 7/8 inch), and nut (5/16 inch).
If the mount bracket does not have the hole shown in
the skid skirt using a 1/2 inch bit, then use a flat-head bolt (1/4 x 3/4 inch), nut (1/4 inch), carriage bolt
(5/16 x 7/8 inch), and nut (5/16 inch).
1. Hole in mount bracket
Figure
3.
Figure 3
4. Right skid skirt
5. Carriage bolt (5/16 x 7/8 inch)
6. Hex-head or flat-head bolt (1/4 x 3/4 inch)
Figure
4, use a hex-head bolt (1/4 x 3/4 inch),
Figure
4, countersink the hole in the upper bend of
Figure 4
3
Figure
3.
g275193
g275616
Advertisement
