cytiva pH/C-902 Instructions Manual

pH/C-902
Instruction
Important user information
All users must read the entire instructions to fully understand the
safe use of pH/C-902.
Safety notices
WARNING
WARNING indicates a hazardous situation
which, if not avoided, could result in death or
serious injury. It is important not to proceed until
all stated conditions are met and clearly
understood.
CAUTION
CAUTION indicates a hazardous situation which,
if not avoided, could result in minor or moderate
injury. It is important not to proceed until all
stated conditions are met and clearly
understood.
Note: A note is used to indicate information that is important for
trouble-free and optimal use of the product.
Declaration of conformity
This product meets the requirements of applicable CE-directives
when installed and used in an ÄKTAprocess™ system. A copy of the
corresponding Declaration of Conformity for the ÄKTAprocess
system is available on request.
The CE marking and the corresponding EU Declaration of Conformity
is valid for the instrument when it is:
•
used according to the Operating Instructions or user manuals,
and
•
used in the same state as it was delivered, except for alterations
described in the Operating Instructions or user manuals.
Introduction
The pH/C-902 Monitor is a high precision on-line monitor for
measurement of pH and conductivity in high performance liquid
chromatography applications.
cytiva.com
The monitor is suitable for pH and conductivity measurements in
pharmaceutical applications where monitoring of running conditions
is critical.
The pH/C-902 Monitor is a combined monitor with two independent
measuring channels for both pH and conductivity.
The pH/C-902 features:
•
Two separate pH measuring channels
•
Two separate conductivity measuring channels
•
Fast response
•
High accuracy and reproducibility
•
Flow cells with small dead volume
•
Flow cells that can be connected close together, minimizing band
broadening and time delays between detectors.
•
Control via UNICORN™ software only.
Safety
•
The instrument is designed for indoor use only
•
Do not use the instrument in a dusty environment or close to
spraying water
•
Only use the instrument in accordance with local safety
regulations
WARNING
The instrument must not be opened by the user.
WARNING
Always disconnect the power supply before
attempting to replace any item on the
instrument during maintenance.
WARNING
The instrument power supply must be connected
to a grounded mains socket.
14003958 AB