Advertisement
Quick Links
Advertisement
Related Manuals for Teknion Versa mini
Summary of Contents for Teknion Versa mini
- Page 1 & keys 10.2022...
- Page 2 standard versa locks Available for lockers: • Single Locker Tower – Standard (PLTSS) • Dual Locker Tower – Standard (PLTDS) • Triple Locker Tower – Standard (PLTTS) Note: The locks also includes an ADA handle and vertical applications as Special (the knob and ADA handle locations are defaulted depends on the door orientation) . Alpha Numeric Keypad horizontal with knob on left...
- Page 3 Alpha Numeric Alpha Numeric Alpha Numeric Keypad Keypad Keypad standard versa keys C Button C Button C Button Key Button Key Button Key Button Key Slot Key Slot Key Slot LED Usage Indicator LED Usage Indicator LED Usage Indicator Shared Use Shared Use Shared Use Knob...
-
Page 4: Key Insertion
key insertion Numeric logo must face towards the keypad. set up Locks are shipped with factory default settings (only operates by pressing). Each lock must be set up to operate with a Programming Key and Manager Keys. Insert the Programming Key. While the LED is flashing, insert one Insert the Programming Key. -
Page 5: Programming Instructions
programming instructions express register manager keys The Programming Key can quickly program multiple locks to operate with the same Manager Keys. To turn on Auto Unlock: Go to a lock already programmed to While the LED is flashing, insert the Insert the Programming Key to End Express Registration mode.* operate with the Manager Keys. - Page 6 programming instructions replace keys The locks must be reprogrammed to prevent the lost/stolen keys from operating a lock. To replace the Programming Key: Note the order or serial number (found on the lock’s rear). Contact Digilock Support to purchase a replacement Programming Key. To replace the Manager Key: Collect all remaining and replacement Manager Keys.
-
Page 7: Auto Unlock
in shared use functionality auto unlock When in shared use functionality, each lock can be programmed to auto unlock after a set number of hours. The default setting is OFF (does not auto unlock). To turn on Auto Unlock: Press . - Page 8 in assigned functionality assign user credentials Make sure that the lock is set for assigned use functionality (a green LED will flash when is pressed). Up to 20 user credentials (User Codes and/or User Keys) may be assigned to each lock. Assign User Codes: Press .
- Page 9 in assigned functionality remove user credentials Make sure the lock is in assigned use functionality (a green LED will flash when is pressed). The locks must be reprogrammed to remove user credentials from operating a lock. Collect all remaining and replacement user credentials (User Codes and User Keys). Press .
- Page 10 in assigned functionality replace an assigned user credential Replace an Assigned User Code with a New User Code: Press then insert a valid Manager Key. A While the LED is on, press [assigned user While the LED is on, press [new 4-7 digit user two-tone beep will be heard, and the LED will code]...
- Page 11 in assigned functionality replace an assigned user credential Replace an Assigned User Key with a New User Key: Press then insert a valid Manager Key. A While the LED is on, insert the assigned user While the LED is on, insert a new User Key. two-tone beep will be heard, and the LED will Key.
- Page 12 operating instructions in shared use functionality In shared use functionality, the user enters any 4–7-digit User Code or inserts any User Key to lock and the same User Code or User Key to unlock. Once unlocked, the lock is available for a different user. Operate with a User Code: To lock: Close the door.
- Page 13 operating instructions in shared use functionality Operate with the User Code: To lock: Press [any 4-7 digit code] then turn the knob to the unlocked To unlock: Close the door then turn the knob to the locked position. position. Open the door.*† Operate with the User Key : To unlock: Insert the assigned User Key then turn the knob to the To lock: Close the door then turn the knob to the locked position.
- Page 14 support sleep mode After three consecutive incorrect User Code entries to unlock, the lock will enter Sleep Mode for one minute. For each subsequent incorrect entry, the lock will remain in Sleep Mode for an additional minute. The keypad is disabled while in Sleep Mode.
-
Page 15: Battery Replacement
battery replacement It is not necessary to uninstall the lock from the door. Surface Mount: Recess Mount: a. Remove the screws and the battery pack. a. Remove the screws and the battery cover. b. Replace the two-premium lithium CR2032 batteries. b.
Need help?
Do you have a question about the Versa mini and is the answer not in the manual?
Questions and answers