Advertisement
Troubleshooting
After proper installation of the 4 drivers, you will find new devices (yellow in the picture) in the Device
Manager window:
If you do not see these devices when the USB Interface is plugged, you have to re-install the USB interface
drivers as described before.
Note that the two USB Serial Port can be disabled if necessary.
Windows Plug & Play Wizard will detect a new device if you plug the USB Interface into a different USB port
of your computer than the one for which you installed the drivers, this is normal. You can re-install the drivers
for this port if you whish to do so, otherwise, use always the same USB port on your computer.
9
Advertisement
