Advertisement
ChronoSplitExcel
Description of the data
Column
Description of the data
A
ID number of the ChronoSplit
B
Serial number of the ChronoSplit
C
Session date and start time
D
ChronoSplit mode
E
Total time of the session (or lap in AUTO LAP) in seconds and thousands of a second
F ...
Intermediate / Partial times recorded during the session
Remarks
The decimal time format in seconds and thousands of a second allow you to easily calculate any type of time
calculations to make custom analysis of your training data.
One line per session in AUTO SPLIT and MANUAL SPLIT modes.
One line per LAP in AUTO LAP and MANUAL LAP modes.
If a total time is 0, it means that the session was not ended by an impulse from a transmitter's CHANNEL 4 in
AUTO SPLIT or CHANNEL1 in AUTO LAP.
CAUTION !
NEVER press START/STOP, SPLIT/LAP and MODE buttons simultaneously!
Doing so will require you to remove and replace the battery in order to reactivate
the ChronoSplit!
Output
11
Advertisement
