Programming Keys; Temperature Inside The Firing Chamber; Target Temperature - PROMETHEUS PRO-1 User Manual

1) 2) 3) 4)

PROGRAMMING KEYS

1) MODE
2) UP ARROW
3) DOWN ARROW
4) LEFT ARROW
This is the 3 position switch of your kiln.
DISPLAY : only shows the temperature of your kiln.
HEATER : shows the temperature and HEATS the
kiln till reaches the target temperature.
OFF : turn offs the kiln.

Temperature inside the Firing Chamber

Target Temperature

This is the digital controller of you kiln. It shows you
the inner temperature of your kiln and the target
temperate. When it's supplying energy to the
heating elements, the OUT led lights.
For programming, take your switch to the Display
position. Press
Su on the screen. Once you see Su, Press the "Left"
arrow button once; you will see a digit of the
Target Temperature start blinking.
You can leave it as it is or change it by pressing UP
and DOWN arrow keys. For changing the other digits
value, you can move the blinking digit by simply
pressing the LEFT arrow and adjust is as explained
before. When you have entered your target
temperature, just press
your adjustment is completed.
MODE key for 2 seconds , you'll see
MODE key for 2 seconds and
1