Midland 74-250C Owner's Manual page 9

OWNER'S MANUAL FOR THE 74-250
Setting the Alarms
•
There are two alarms available. They are identified with a number one and a number
two inside of a bell that is displayed next to the temperature.
From the clock display:
1. Press and release the "MODE" button (usually twice) until you see on the display the
bell icons with a 1. This is displayed in the upper center of the display. The time is
followed by AL.
•
The bell icon with the number is the alarm you will be setting.
1. Press and hold the "SET" button until the hour is flashing. Press the "UP or DOWN"
buttons to set the hour.
2. Press and release the "SET" button, the minutes will flash. Press the "UP or DOWN"
buttons to change the minutes.
3. Press the "SET" button when setting is complete.
To set the second alarm press "MODE" button to cause the bell icon with a 2 to be displayed and
repeat the steps above.
Turning off the Alarms
It is possible to turn off one or both of the alarms.
•
From the clock display:
1. Press the "Mode" button (two or three times depending on which alarm you want to
turn off) to see on the display the bell icon with the number inside. The number will be
the alarm you are turning off.
2. Press and hold the "SET" button until the hours flash.
3. Press and release the "SNOOZE / FUNC" button. The display will flash OFF.
4. Press "SET" to set the alarm to the off position.
Turning on the Alarm (s)
•
From the clock display:
1. Press and release the "MODE" button (two or three times depending on which alarm
you want to turn on) until you see on the display the bell icon with the number of the
alarm you want. You will see on the display OFF.
2. Press and hold the "SET" button until the OFF flashes.
3. Press and release the "SNOOZE / FUNC" button to cause the alarm time to be
displayed. The hours will flash indicating you can set as desired. Follow the
instructions above to set the alarm.
http://www.midlandradio.com Page 9 of 15