Quick Reference; Operation Reference - Midland 70-440BP User Manual

70-440 User manual

Quick reference

Operation reference

1) Output Power: Press the "FUNC" key to set High or Low Power output. "LOW" icon is displayed to
show that you set Low Power output. (high output has no indication)
2) Group Mode: Press the "MON" button to enable/disable GROUP MODE. "SAT" icon is displayed.
3) Squelch: Press and Hold "MON" button to enable/disable the squelch.
4) Scan: Press the "CALL" button + the
5) Scan List: Press the "CALL" button + "MON" key to change the channel in the scan list. The "•"icon
will be displayed if the channel is in the scan list.
6) Priority: Press the "CALL" button + the
"P" icon will be displayed.
7) Lock: Press the "FUNC" + the
when the unit is locked (VOX is disabled).
8) "VOX" Press the "FUNC" + the
"VOX" icon will be displayed. ("PTT" button is disabled)
9) When "VOX" function is enabled, Press the "FUNC" + the
sensitivity. VOX icon blinks to show LOW sensitivity.
10) Press the "CALL" Button for about 2 seconds to send an alert with a ringer type tone to all the users
in the fleet. (ringer will also be heard from the speaker when activated)
11) Press the "FUNC" + "CALL" keys to enable / disable roger beep at the end of the transmission.
12) Press "FUNC" + "MON" keys to enable/disable key beep.
Press the "FUNC" + the
the PROGRAMMING MODE. This operation is only allowed to authorized person.
key to enter the SCAN.
key to activate the programmed priority channel. A
keys to lock/unlock the radio. Only "PTT" button will function
keys while turning on the radio to enable/disable "VOX".
key and switch on the unit. UP will be displayed and unit enters
key to set HIGH or LOW "VOX"
Page. 21