Table of Contents
Advertisement
2 Safety instructions
2.1 General information on this chapter
The hydraulic power unit was designed and manufactured according to the generally
accepted code of practice. However, there is still the danger of personal injury and
damage to property if you do not observe this chapter and the safety instructions in
this documentation.
▶
Read this documentation completely and thoroughly before working with the
hydraulic power unit.
▶
Keep this documentation in a location where it is accessible to all users at all times.
▶
Always include the required documentation when you pass the hydraulic
power unit on to third parties.
Due to the interaction between the hydraulic power unit and the complete machine,
the installation of the hydraulic power unit into the overall machinery/system
will result in additional potential hazards. This applies in particular to the
influence of hydraulic and electric controls on hydraulic drives generating
mechanical movements. It is therefore essential for the manufacturer of the
overall machinery/system to have undertaken an independent risk assessment.
Furthermore, the manufacturer must on this basis have prepared operating
instructions for the complete machinery.
These operating instructions do not serve as replacement of the operating
instructions of the overall machinery/system.
2.2 Intended use
The hydraulic power unit is a hydraulic system component.
You may use the product as follows:
The hydraulic power unit constitutes partly completed machinery in the sense of the
EC Machinery Directive 2006/42/EC and is respectively not usable.
The hydraulic power unit is exclusively intended for integration into a machine or
system or for assembly with other components to form a machine or a system.
The product may be commissioned only if it has been integrated into the machine or
system for which it is designed and if the machine or system fully complies with the
requirements of the EC Machinery Directive.
The hydraulic power unit serves for regulated generation of hydraulic flow and
hydraulic pressure.
The hydraulic power unit is not considered to be a safety component in the sense
of the EC Machinery Directive 2006/42/EC.
The hydraulic power unit must not exceed the operating conditions and
performance limits specified in the technical data.
The hydraulic power unit is technical equipment exclusively intended for professional
and not for private use.
Safety instructions 11/128
CytroBox, RE 51057-B/11.19, Bosch Rexroth AG
Advertisement
Table of Contents
