Download Print this page

Microtek MTMA Template

Magnetic transparent media adapter

Table of Contents

Download this manual

The MTMA is a scanner accessory that is used to scan transparent materials as large

as 7" x 10" with your flatbed scanner. Before proceeding any further, check to see that

all items are in the package. If any item is missing, contact Microtek Customer Service.

MTMA

up and ready to scan.

Peel off the vinyl film that covers the back surface

of the template and the 4 film stoppers.

2002 Microtek International, Inc.

I49-003474 A, September 2002

: Before installing the MTMA, your scanner should be set

Vinyl film

http://www.microtek.com

Template

4 film

stoppers

Table of Contents

Need help?

Do you have a question about the MTMA and is the answer not in the manual?

Page 1 The MTMA is a scanner accessory that is used to scan transparent materials as large as 7" x 10" with your flatbed scanner. Before proceeding any further, check to see that all items are in the package. If any item is missing, contact Microtek Customer Service.
Page 2 You must keep this area clear and free from any obstruction. Otherwise, the quality of your scanned image may be adversely affected or cause the scanner to malfunction. Microtek MTMA Installing and Getting Started Calibration : Make sure that the anti-skid rubber part of all 4 Stoppers stoppers are facing toward the glass surface.
Page 3 (e.g., ScanMaker 4600, 4700, X12USL, etc.). In this case, turn the MTMA 180° around, making the front side of the MTMA sit on the front edge of the scanner glass bed. Then retry by clicking the Scan button as explained in step 10.
Page 4 Scanning Area: Dimensions: Net Weight: Power Consumption : Operation Environment Temperature: Humidity: Microtek MTMA Installing and Getting Started Click on this button to switch to the Advanced Control Panel window Click here to exit ScanWizard 5 Flatbed Scanner Option Cold Cathode Lamp 3 min.