Related Manuals for Gamma Led Vision TX-6 Z
Summary of Contents for Gamma Led Vision TX-6 Z
- Page 1 TX-6 Z 350w LED Spot with CMY Color Mixing User Manual TX-6 Z– GAMMA LED Vision Page 1 of 19...
-
Page 2: Table Of Contents
2. Setup and Operation............................7 Using the LCD Menu and Buttons........................7 DMX Setup................................8 DMX Basics................................8 DMX Wiring................................8 DMX Modes and Configuration........................10 3. Maintenance................................15 Routine Maintenance............................15 Fixture Cleaning..............................15 Troubleshooting Problems..........................15 4. Technical Specifications............................17 Photometric Reports............................18 TX-6 Z– GAMMA LED Vision Page 2 of 19... -
Page 3: Introduction And Setup
Introduction and Setup Unpacking and In the Box Thank you for choosing the TX-6 Z from GAMMA LED Vision. You will see you have acquired a powerful and versatile moving light. Inside the box you should find: • TX-6 Z Fixture: •... -
Page 4: Features
Color Wheel with Variable CTO Filter Frost Filter Variable Strobe Dual, Independently Rotating Prisms Motorized Focus Color and Variable CTO Wheel: Fixed Gobo Wheel: Rotating Gobos (22.7mm OD, 14mm Max Image Size) TX-6 Z– GAMMA LED Vision Page 4 of 19... -
Page 5: Safety Precautions
∙Don’t try to modify the fixture without any instruction by the manufacturer. ∙Warranty is voided if there are any malfunctions from not following the user manual while op- erating or any hazardous operation, like shock short circuit, electronic shock, lamp broken, etc. TX-6 Z– GAMMA LED Vision Page 5 of 19... -
Page 6: Customer Support
Customer Support WARRANTY POLICY GAMMA LED Vision warrants its products for the periods set below from the date of pur- chase to be free of manufacturer and workmanship defects. Warranty does not cover nor- mal wear and tear caused by force, negligence or misuse of products. GAMMA LED Vi- sion is not responsible for any damages or injury caused by misuse or improper handling of the products and in accordance with instructions and specifications of manual. -
Page 7: Setup And Operation
2. Setup and Operation Using the LCD Menu and Buttons The TX-6 Z features a standard LCD screen and buttons for operation. Press Menu to en- ter the menu. Use the Up and Down arrows to navigate through the options and press Enter to go into the menu or confirm your selection. -
Page 8: Dmx Setup
1, 2, and 3 are used. The cable should be a 2 conductor, shielded cable of at least 110 ohms resistance. Microphone cable is not DMX cable. Please refer to the dia- gram below: TX-6 Z– GAMMA LED Vision Page 8 of 19... - Page 9 XLR plug with a 120 Ω resistor connected between pins 2 and 3, which is then plugged into the output XLR socket of the last fixture in the chain. Please see illustrations below: TX-6 Z– GAMMA LED Vision Page 9 of 19...
-
Page 10: Dmx Modes And Configuration
DMX Modes and Configuration The TX-6 Z has multiple DMX modes, sometimes called “personalities”, “profiles”, or as we will use here “modes”. In general, modes with more DMX channels offer a greater level of control or options but take up more of your output channels on your lighting console or software. - Page 11 160-169 Amber+UV 170-179 UV+Open 180-215 Color Wheel Rotate CW 216-220 Stop 211-255 Color Wheel Rotate CCW Cyan 0-255 Variable Cyan Control Magenta 0-255 Variable Magenta Control Yellow 0-255 Variable Yellow Control TX-6 Z– GAMMA LED Vision Page 11 of 19...
- Page 12 Gobo 9 Shake, Slow to Fast 110-114 Gobo 10 Shake, Slow to Fast 115-119 Gobo 11 Shake, Slow to Fast 120-127 Gobo 12 Shake, Slow to Fast 128-190 Gobo Cycle, CW TX-6 Z– GAMMA LED Vision Page 12 of 19...
- Page 13 0-400º Indexing 128-190 Gobo Rotate CW, Fast to Slow 191-192 Stop 193-255 Gobo Rotate CCW, Fast to Slow Gobo Rotation 0-255 Fine Control for Gobo Rotation Fine Prism 1 (8-Facet) 0-127 Open TX-6 Z– GAMMA LED Vision Page 13 of 19...
- Page 14 Frost 0-127 Open 128-255 Insert Frost Reserved Zoom 0-255 2º to 20º Focus 0-255 Motorized Focus Control Focus Fine 0-255 Fine Control for Focus Reset 0-209 No Function 210-255 Reset All TX-6 Z– GAMMA LED Vision Page 14 of 19...
-
Page 15: Maintenance
Press the menu button to confirm that the unit is powered on. If the screen does • not light up, the unit has no power. B. Not Responding to the DMX Controller Check DMX cables to verify that they are plugged in and functional. • TX-6 Z– GAMMA LED Vision Page 15 of 19... - Page 16 C. One of the functions is not working well The stepper motor might be damaged or the cable connected to the PCB is bro- • ken. The motor’s drive IC on the PCB may be bad. • TX-6 Z– GAMMA LED Vision Page 16 of 19...
-
Page 17: Technical Specifications
Motorized Zoom from 2º -22º • Multiple DMX modes. • AC100-240v, 50/60Hz autosensing • 430w total power consumption from a 350w LED source • Weight – 49.5 lbs • Dimensions: 15”x10.6”x25.5” • TX-6 Z– GAMMA LED Vision Page 17 of 19... -
Page 18: Photometric Reports
16300 7800 4550 2950 Zoom Out, Focused: 22º Full White Intensity in FC Distance in Ft. 1840 Zoom 50%, Focused:10º Full White Intensity in FC Distance in Ft. 8100 2630 1120 TX-6 Z– GAMMA LED Vision Page 18 of 19... - Page 19 CRI, TM-30, and Spectral Distribution: CRI 71.8, 7583k Color Temperature TX-6 Z– GAMMA LED Vision Page 19 of 19...