Coby MP-C440 Operating Instructions Manual page 9

Connect to PC
Verify Correct Installation of the unit
1
The player is ready to use when the Player
Update is complete. To check if the MP3 Flash
Player has been properly installed on your
system, double-click the MY COMPUTER
icon on the desktop of your computer.
2
You will observe your MP3 Flash Player shows
up as Removable Disk (F:) drives in Windows.
3
Removable Disk (F:) implies the built-in flash
memory (128 MB) of the MP3 Flash Player.
If you are using Windows Me,Windows 2000 ,Windows
XP, please do follow the Windows Instructions to
disconnect the player. Once you connect the player
to PC, you may observe there is one icon appearing
in right of the Taskbar.
When you are going to disconnect the player, double-
click on this icon, and click on the Stop button in the
"Remove Hardware Device" dialog window. And click
on OK button when asked which device to be stopped.
The "Safely Remove Hardware" window appears to
tell you that now it is safe to remove the player. Now
you can disconnect the player from computer safely.
If you disconnect the player not following the
instructions in Windows Me,Windows 2000 and
Windows XP, it may cause damage to the data or file.
For Macintosh Users
1
Computer will detect new hardwares and
install them automatically. Untitled Disk
(F:) will appear on desktop.
2
Untitled Disk (F:) implies the built-in flash
memory (128 MB) of the MP3 Flash Player. .
7
MP-C440
Portable MP3 Player