Advertisement
Quick Links
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
User's manual
Benchtop Drill
63368
Illustration similar, may vary depending on model
Advertisement
Related Manuals for XPOtool 63368
Summary of Contents for XPOtool 63368
- Page 1 User’s manual Benchtop Drill 63368 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.
- Page 2 To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods. Retourenabteilung WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler – Germany E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.XPOtool.com Item 63368 Page 2 The Tool Experts 06 2022-1...
- Page 3 • Do not lean too far forward. Ensure a safe stand and keep your balance. • Keep the machine regularly maintained and serviced. https://www.XPOtool.com Item 63368 Page 3 The Tool Experts 06 2022-1...
- Page 4 8. Determine the desired speed for the drilling process and ensure that the belt is installed in the correct position for the selected speed. Release the belt tension handle and turn the motor anticlockwise to apply tension to the belt. https://www.XPOtool.com Item 63368 Page 4 The Tool Experts 06 2022-1...
- Page 5 Turn the chuck key clockwise to tighten the drill bit, turn it anticlockwise to loosen 4. The drill depth can be adjusted either with the help of the pointer and depth scale or with the stop nuts on the feed stop rod. https://www.XPOtool.com Item 63368 Page 5 The Tool Experts 06 2022-1...
- Page 6 Only switch the laser beam on after the work piece has been placed. Attention! Remove the laser batteries in case the device is not used during several days. https://www.XPOtool.com Item 63368 Page 6 The Tool Experts 06 2022-1...
- Page 7 The power supply for this machine is single-phase alternating current (AC). The control of the circuit is shown as below: № Name № Name Motor Wire connection Motor cord White Green Black Black Green Power switch Power cord https://www.XPOtool.com Item 63368 Page 7 The Tool Experts 06 2022-1...
- Page 8 Knob Pulley insert Head pan screw M5×0.8–12 Spindle pulley Belt ⁄ ×26 Screw M6×1–12 Cover Cord clamp Screw M6×1.0–1.2 Head pan screw M5×0.8–16 Retaining ring Washer Ball bearing 17 mm https://www.XPOtool.com Item 63368 Page 8 The Tool Experts 06 2022-1...
- Page 9 № Name № Name Gasket Spindle shaft Ball bearing 12 mm Chuck Sleeve Chuck key Screw M5×0.8–20 Hex nut M6×1.0 Stop collar Hex nut M5×0.8 Retaining ring Stop rod https://www.XPOtool.com Item 63368 Page 9 The Tool Experts 06 2022-1...
- Page 10 Motor setting knob Spring seat Hexagonal head screw M8×1,25–8 Spring retainer Knob Tension spring Spring cover Pinion shaft Hexagon head nut Hex bolt M8×1.25 Power cable Screw M8×1.25 Set-up key https://www.XPOtool.com Item 63368 Page 10 The Tool Experts 06 2022-1...
- Page 11 WilTec Wildanger Technik GmbH Königsbenden 12 / 28 52249 Eschweiler Germany Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 63368 Page 11 The Tool Experts 06 2022-1...
Need help?
Do you have a question about the 63368 and is the answer not in the manual?
Questions and answers